AC1000
Replacement Safety Key
Fits all RIDGID Stationary Tools and Edge Belt/Spindle
Sander.
PART NUMBER AC1000
PRICE $5.00
|
AC1021
Deluxe Miter Gauge
With adjustable stops at 0°, 45° left
and right. For use with RIDGID BS1400 and EB4424.
PART NUMBER
AC1021
PRICE $49.00
|
AC1022
Miter Gauge Hold Down
Clamps the workplace to the miter gauge. Fits
5/16"-18 threaded hole in the top of the head and a 3/4" x 3/8" bar. Use
with RIDGID TS2412 and TS2400.
PART NUMBER
AC1022
PRICE
$35.00
|
AC1025
7" Dado / Molding Insert
For use with 7" Dado blade or molding head cutter.
Use with RIDGID TS2424, TS2412, and TS2400.
PART NUMBER
AC1025
PRICE $49.00
|
AC1060
Storage Hooks
Used to store rip fence, miter gauge, or other
accessories on-board your tool. Use with RIDGID TS2412 and TS2424.
PART NUMBER
AC1060
PRICE $16.00
|
AC1035
Zero Clearance Table Saw Insert
Use with RIDGID TS2424, TS2412, and TS2400, TS3612.
PART NUMBER
AC1035
PRICE $34.00
|
Retro Fit Rip Fence
Provides 36" right and 12" left rip capacity.
Saws must be cast iron with 27" table front to back and 10" minimum wide
extension.
PART NUMBER
AC1036
PRICE
$229.00
|
AC9950
Heavy Duty Caster Platform
Provides easy mobility of RIDGID Table Saws. Use
with RIDGID TS2424, RS1000, and WL1200.
OUT OF STOCK
PART NUMBER
AC9950
PRICE $144.00
|
AC1099
Radial Saw Dust Collector
Fits all RIDGID and Craftsman 10" full-size stationary
radial saws. Works with the blade in any rip or crosscut position. Keeps
your work area clear of sawdust and wood chips. Collect dust at the source.
Reduces clean-up time. Attaches to your radial saw and connects to your RIDGID
Wet/Dry Vac. or Dust Collection System. Use with RIDGID RS1000.
PART NUMBER
AC1099
PRICE $38.00
Part is No Longer Available
(and none in stock)
|
AC2101
Cutter Bit Set
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
PART NUMBER
AC2101
PRICE $28.00
|
AC3000
Miter Saw
Clamp Kit
Provides added workplace stability. Use with RIDGID MS1050 and
MS1060 only.
PART NUMBER
AC3000
PRICE $21.00
|
AC6010
Work Arbor
Convert your RIDGID For use with RIDGID DP1500 - 15" Drill Press
or any stationary drill press. 1/2" - 20 Threaded Arbor with a 1/2" diameter
shaft. Mounts buffing wheels, wire brush wheels, and drum sanders into drill
chuck for added versatility. /font>
PART NUMBER
AC6010
PRICE $19.00
|
AC5001
Band Saw
Rip Fence
Contents: Rip Fence, Front and Back Rails, Mounting Hardware and
Instructions. Use with RIDGID BS1400.
PART NUMBER
AC5001
PRICE $72.0
|
AC5005
Riser Block
Provides additional 6" depth of cut. Use with RIDGID BS1400.
PART NUMBER
AC5005
PRICE $142.00
|
AC5006
Sanding Belt
92 1/2" replacement sanding belt. Use with RIDGID BS1400.
PART NUMBER
AC5006
PRICE $28.00
|
AC8601
Push Blocks
- 2 Pack
Provide added workplace control. Use with RIDGID JP0600.
PART NUMBER
AC8601
PRICE $20.00
|
AC5007
Cool Blocks™
replacement blade guides. Use with RIDGID BS1400.
PART NUMBER
AC5007
PRICE $32.00
|
AC8020
Live Center
No. 1 Morse Taper, 60° Taper Point. For use with WL1200.
PART NUMBER
AC8020
PRICE $25.00
|
AC8040
4" Face
Plate
3/4"-16 Thread Connection. Holds up to an 8" diameter bowl. For
use with RIDGID WL1200.
PART NUMBER
AC8040
PRICE $31.00
|
AC8060
6" Face
Plate
3/4"-16 Thread Connection. Holds up to an 12" diameter bowl. For
use with RIDGID WL1200.
PART NUMBER
AC8060
PRICE $25.00
|
AC8601
Push Blocks
- 2 Pack
Provide added workplace control. Use with RIDGID JP0600.
PART NUMBER
AC8601
PRICE $20.00
|
AC9910
Universal
Leg Set
Fits all RIDGID benchtop tools and most other bench top brands.
Adjustable height from 24" to 34". Adjustable footprint from 24" square to
32" square. Works with RIDGID MS1250, MS1050, TS2400, TP1300, SS1650, and
EB4424.
OUT
OF STOCK
PART NUMBER AC9910
PRICE $88.00
|
AC8010
4" x 24"
Work Arbor
1/2-20 Threaded Arbor with a #1 Morse Taper. Secures buffing wheels
and drum sanders to headstock and drill chuck to tailstock or headstock.
For use with RIDGID WL1200 12" Wood Lathe and any other wood lathe with a
#1 morse taper.
PART NUMBER
AC8010
PRICE $19.00
|
|
